Power system protection

Follow plz

Power systems protection in tiktok https://www.tiktok.com/@ahmed213267?_r=1&_t=ZN-97F1jJ1ivH4

https://vm.tiktok.com/ZNRcEPT55/

●●● Transformer Factory Acceptance Test: • Measurement of winding resistance • Measurement of voltage ratio and check of phase displacement • Vector Group Test. • Measurement of short-circuit impedance and load loss . • Measurement of no-load loss and current . • Dielectric routine tests . • Tests on on-load tap-changers . • Determination of capacitances. windings-to-earth and between windings • Measurement of dissipation factor (tan δ) • Temperature-rise type test . #electricalengineering #transformers #testing #factory https://www.facebook.com/share/p/1HnpeiHCeg/

https://www.facebook.com/share/p/18YjYXYkdq/

How to reduce step and touch potential in electrical substation? https://www.facebook.com/share/p/1JrEGP7DcM/

Fuses rating standard https://www.facebook.com/share/p/1EKLMVwLXK/

Understanding interlocking logic for switchgear https://www.facebook.com/share/p/1CK9EgpTjk/

Understanding restricted earthing fault protection https://www.facebook.com/share/p/1PXLjTqJyZ/

Understanding of high voltage single line diagram 220kv incomer https://www.facebook.com/share/p/1Ai3KzQc6w/

Share plz

Types of Relay Testing : https://www.facebook.com/share/p/1D8NhW7CDs/

Motor control centre test https://www.facebook.com/share/p/1DCpa1tHyw/

●●● Proper Installation Location of Neutral Current Transformers In the illustrated four-wire low-voltage system, which of the two proposed configurations (Option 1 or Option 2) represents the correct installation position for the neutral current transfornmer? Furthermore, if the input circuit breakers and couplings are of the four-pole type, which option would be deemed appropriate under such conditions?

https://www.facebook.com/share/p/1bTApR2wqZ/

https://www.facebook.com/share/r/1KTi2DYp6q/