🚀 Joshaby's Xiaomi 12 Hub
СтатистикаWelcome to Joshaby's Xiaomi 12 Hub. Here you'll find Custom ROMs, Custom Kernels, Magisk modules, and much more. Did you like my work🤔? Make a donation to me on Ko-fi: https://ko-fi.com/joshaby Author: t.me/Joshaby
- Последний пост
- 13:51
- Последнее чтение
- 10:13
- Постов за неделю
- 19
- Всего постов
- 134
- Тип
- открытый
- Язык
- английский
- В каталоге с
- 12 авг.
- 1/24сутки в ленте
- 345
- 1/48двое суток
- 395
- 1/72трое суток
- 426
Оценка по просмотрам недавних постов: пост набирает почти всё за первые сутки.
Посты
без подписи
без подписи
без подписи
AlphaCore Kernel version v2.0.0 Only for AOSP ! Cupid - Zeus - Diting Notes : Special Release Indonesia's Independence Day 🇮🇩 • Linux Version: 5.10.256 • KernelSU-Next v3.3.0 (33239-2) • SUSFS v2.2.0+ • Update 17-08-2026 Changelog v2.0.0 : • Updated Kernel Base - Backported selected upstream Linux 5.10.261 stability fixes onto the 5.10.256 base • Updated KernelSU-Next to v3.3.0 (33239-2) • WireGuard Stability Fix - Fixed packet trailer handling during encryption • Baseband Security Guard - Added Baseband Guard integration - Added protection against unauthorized writes to critical partitions - Added optional boot partition protection - Added optional recovery partition protection - Integrated Baseband Guard with the kernel LSM framework • F2FS Stability & Integrity Improvements - Improved section capacity handling with CAP_BLKS_PER_SEC - Fixed inline inode xattr size validation - Fixed pinned file allocation alignment - Added ACL entry size validation against malformed data - Fixed inline inode FIEMAP address mapping for unwritten data • Bluetooth L2CAP Stability Fix - Improved outstanding TX identifier tracking - Reworked L2CAP identifier allocation using IDA - Improved handling of identifier reuse and response tracking • Linux Scheduler Stability Fix - Fixed scheduler statistics handling for allowed CPUs • Linux Thermal Stability Fix - Fixed thermal hwmon critical temperature attribute cleanup • Upstream Qualcomm / MSM Stability Fixes - Fixed Qualcomm A53 PLL 1152MHz frequency multiplier - Fixed Qualcomm Venus NV12 raw buffer size calculation - Fixed Qualcomm MSM DisplayPort ISR enum values - Fixed Qualcomm MSM DisplayPort HPD state bit shift - Fixed Qualcomm A6XX HFI queue synchronization - Fixed Qualcomm A6XX HLSQ register dumping - Corrected Qualcomm MSM8998 DSI version identification - Fixed Qualcomm AOSS cooling state comparison - Fixed Qualcomm OCMEM probe deferral handling ® Full Changelog Tested On ROM : - AxionOS v2.7 A16 by Kyo.kusanaghi - LunarisAOSP v3.12 by Kyo.kusanaghi - Infinity-x v3.12 by Kyo.kusanaghi - LunarisAOSP v3.9 by KernelPanix Maybe in the next build I won't update the kernel too often because I'm busy with work, so enjoy it and thank you for trusting the kernel I've created 🤟 © About me
⚠️ SECURITY WARNING 🚨 Do NOT install any module called sssjja.zip or anything claiming to be "Zygisk Floating Menu". 🛑 It is 100% malware: • Intercepts and forwards ALL your SMS to an attacker via Telegram 📲📤 • Blocks incoming messages before they reach you 🚫📨 • Opens a root-level backdoor on your device 🔓💻 • Designed to steal banking OTP codes 🏦🔒 If you already installed it, delete it immediately: /data/adb/modules/zygisk_floating_menu 🗑️ Then change all your banking passwords from a clean device. 🔐🔄 Share this with every root community you're in. 📢🔗
https://github.com/Matvel007/MiUnlockApp
Check the battery temperature.
14 kills
EvoX and crDroid builds are dropping today—stay tuned... Join the channel to download the ROMs if you can't wait. https://t.me/joshabyxiaomi12hublivebuilds
For MIUI/HyperOS
Templar Kernel v6.4 Update: 16/08/26 By WiL 🔸 Download 🔸 Changelogs | Notes 🔸 Donate 🔸 Source | Credits 🔸 Support Group | Channel Update Thanks To : • @iambouttacum (Support) • @Pavellc (Support) • @Anyaanasera (Support) • @xfor_han (Banner) • All Tester and to everyone who uses this kernel 👉 Follow @PocoF5IDUpdates 👉 Join @PocoF5indo #GKI #Templar #Kernel #Templar_Kernel #LinuxStable
And add to my builds the Poco F5 - Marble
I'm going to temporarily switch from AxionAOSP to Infinity X, and I'm thinking of switching to vanilla ROMs. Can you convince me to do that?
Banner: @Joao_lisa
In the Axion build group, it's clear that it's not good, and I have friends who also build Axion and they told me it's not good either.
Regarding the Axion reboot issues, I see that the problem is with the ROM itself and not my DT. If it were my DT, all the ROMs I've tried would have this problem. Sometimes it seems like nothing is my fault.
I forgot to post this; it's the same build I mentioned before.
🚀 Joshaby's Xiaomi 12 Hub pinned a photo
🚀 [TEST BUILD] AxionAOSP 2.8 Oneira | Android 16 QPR2 | Unofficial | Xiaomi SM8450 📝 Changelog 🏞 Screenshots ⬇️ Download: • Xiaomi 12 - Cupid • Xiaomi 12 Pro - Zeus • Xiaomi 12S - Mayfly • Xiaomi 12S Pro - Unicorn • Xiaomi 12T Pro - Diting • Xiaomi 12S Ultra - Thor • Xiaomi Poco F5 Pro - Mondrian 👨💻 Maintainer: @Joshaby 📦 Version: 2.8 🔧 Build Type: Stable 📅 Build Date: 03 Aug 2026 🔥 Features: • Gapps build • Based latest Firmware • Phoenyx Core v3 Test 5.10.256 with KernelSU Next v3.3.0 33227-2 + SuSFS v2.2.0 + KPatch Next + Mountify + BBG + Optimizations Patches from Wild KSU + Droidspace + NTSync + IPSet + BBR + ... • MIUI Camera from Poco F5 - Marble • 863.1 GPU Driver with Vulkan 1.3.295 from RayBan Meta • XiaomiParts(Thermal Profiles + Core Control + Powertools + Display Saturation + Clear Speaker + KProfiles) • AospaDolby/LunarisBolby + Dolby Vision • Tweaks to improve battery consumption, interface fluidity, and RAM usage. • High Touch Polling Rate support ⚠️ Notes: • Use a custom Telegram client to download ROMs • If you see any problems, send a message in the channel chat. If it's something I know how to fix, I'll fix it. • This v3 version of PhoenyxCore includes many modifications that have improved the device's fluidity; these will be detailed in the stable version's changelog. Improvements include backports and the optimization of C functions at the assembly level. • Kernel spoofed as "5.10.236-android12-9-00003-gfb24cf99ad97-ab14313284" for GMS • High idle power consumption caused by the SIM signal likely fixed. • Disable Device Health Services if you want better idle power consumption. • There have been reports of random restarts with this build (I don't know the frequency).. 🤝 Support me on Ko-fi 👉 Follow @Joshaby'sXiaomi12Hub
I'm focusing on my YouTube channel now; I've already had over a million views in one week and 1600 subscribers. It's going really well.